2017年1月13日星期五

Google Nexus Watch: What’s the story so far?

Google Nexus Watch: What's the story so far?
For the past few months, rumours have been building suggesting that Google is doubling down on its own hardware design. That means we’re likely to see Google-branded smartphones, tablets, Chromebooks and – perhaps – smartwatches.
With the holiday season closing in, here’s everything we know so far about Google’s rumoured Nexus watches.

Nexus Watch: Names

Like the upcoming HTC Nexus/Google phones, there are two watches in development and they are currently being called by their codenames which both feature a fish of some kind. The larger watch is currently named Angelfish, while the smaller model is Swordfish.
Google isn’t expected to stick with these names. Until recently, the watches were just branded “Nexus Watch” by the media. Of course, there’s a chance that Google won’t even continue with the Nexus naming. Whether they’re given the Nexus moniker or not, they will undoubtedly be launched with the Nexus spirit of being completely optimised for all that Android Wear has to offer.

Nexus Watch: Design

The larger and more spec-tastic of the two, Angelfish, is claimed to measure 43.5mm in diameter, while the smaller watch, Swordfish, is 42mm, similar to the Huawei Watch and 2nd gen Moto 360.
What’s interesting is that, according to Android Police’s sources, Angelfish will be equipped with a different array of physical buttons. This watch is claimed to feature the usual “crown” button halfway up the right edge, but also feature two shoulder buttons which don’t protrude as far. The larger model also appears to have a much thicker, darker metal casing with fitting for a wider watch strap.
Moving on Swordfish, and it appears that this model only has the one, single oddly designed button on the right edge. Despite its case diameter only being 1.5mm narrower than the larger model, the watch strap is quite noticeably much narrower, by at least 4-5mm.
As well as being smaller, the 42mm Swordfish model is claimed to feature a much rounder design. Although both have a circular face, the smaller model is rumoured to have glass that curves towards the edges, and a bezel which itself curves a little. Angelfish is much flatter, and more angular.
If one was to generalise it, we could assume that perhaps the more rounded, less angular model with a thinner strap was designed with a female target market in mind, while the bigger version is supposedly more “masculine”.

 

Android Police

Nexus Watch: Display

Nothing has yet been specifically mentioned about the Nexus Watch displays in terms of exact dimensions. However, Android Police noted that the screen would be slightly smaller than the Moto 360, and will have a small black gap between where the watch body ends and visible display begins to avoid a section being cut-off. In other words, the screen will have a slim black ring around the edges, but thankfully won’t have a hideous “flat tyre”.
As for size and resolution, any mention of those would be completely speculative. It wouldn’t be surprising to see a display similar in size and resolution to the Huawei Watch which features a 400 x 400 resolution 1.4-inch circular display boasting a pixel density of 286ppi (pixels per inch).

Nexus Watch: Specs

Google has long been a partner with Qualcomm for its Nexus smartphone chips. Likewise, most notable Android Wear watches are powered by a Snapdragon chip of some kind, so it’s likely that Google’s Nexus Watch will make use of the newest Snapdragon 2100 chip designed specifically for wearables. That is, of course, unless Qualcomm announces a new processor in between now and when the watches hit the market, which wouldn’t be surprising.
More interestingly, as well as being different in design and size, the Angelfish and Swordfish are predicted to offer different features to each other. As you can imagine, that means you’ll see more packed in to Angelfish.
For the most part, it seems the Angelfish is being designed to work as a standalone device. In other words, you won’t need to have your phone on you all the time to make use of it. It will have LTE connectivity for data connection, and GPS for location tracking, while the smaller Swordfish watch will not, according to Android Police.
With Android Wear 2.0 featuring the ability to have apps natively installed on the watches, you’d expect that also means a slight jump in available storage space: 4GB could be enough, but 8GB would ensure users don’t get storage anxiety.
Pocket-lint

Nexus Watch: Software

Of all the rumours surrounding the Nexus watches (or whatever they end up being called), the software is the one element we have some certainty over.
Google announced a brand new wearable operating system called Android Wear 2.0 at Google I/O 2016 this summer. If the company does launch these watches, they will run Android Wear 2.0 and will be a glittering showcase for the new software.
Android Wear 2.0 features – among other things – standalone native apps so that your watch is less reliant on your smartphone. It also has a more advanced messaging system, which allows you to scribble or type replies on the touchscreen, as well as a refreshed app launcher screen.
The fitness app and notifications have also seen something of a design revamp, plus, advanced complications means you can have all kinds of information showing on your watch face, regardless of which watch face it is.

Nexus Watch: Release date and price

Until Google officially confirms their existence, we won’t know precisely when the Angelfish and Swordfish watches will be released, or how much they will cost. However, it would make complete sense to launch them alongside the next Nexus smartphones later this year. That could put the date as September or October 2016.
Prices will likely be similar to current Android Wear watches. We’d expect the smaller 42mm model to cost between £230-£300, while the larger model will likely cost more than £300. Unless of course Google decides to return to its Nexus roots and offer them at close to cost price, making them ultra-affordable.
voir plus copie rolex et copie montre de luxe

2017年1月12日星期四

La prochaine Apple Suivre aurait aura pas la connectivité cellulaire


La prochaine Apple Suivre aurait aura pas la connectivité cellulaire
Apple est largement attendu pour introduire la prochaine génération de la montre Apple avant la fin de l'année, et aujourd'hui Bloomberg a quelques détails sur ce qu'il faut attendre - et ce qui se laissé de côté. Alors que le next-gen Watch devrait inclure des capacités GPS pour aider avec le suivi de l'emplacement et le mouvement sans votre téléphone, il va encore besoin de votre téléphone pour la plupart tout le reste. Le rapport indique que Apple espérait inclure une puce cellulaire à part entière de sorte que la montre peut fonctionner entièrement sur lui-même, sans avoir besoin d'être connecté à un iPhone, mais cela ne se produira pas cette fois-ci.
C'est en raison de la décharge de la batterie qu'une radio cellulaire nécessiterait - apparemment l'expérience serait tout simplement trop compromis en ce moment.Cependant, il semble que Apple a été encore en mesure d'ajouter une puce GPS, elle-même une composante relativement avide de pouvoir. Mais avec la mise au point d'Apple sur le suivi de la santé et de remise en forme, une puce GPS fera la prochaine montre d'Apple beaucoup mieux à la navigation et la détermination de la course et les distances de marche.
Finalement, l'objectif d'Apple est de découpler la montre et iPhone entièrement, mais pour l'instant il semble que l'expérience de l'utilisation de la prochaine génération d'Apple montre ne sera pas très différentes de ce qui est là maintenant. Cela marque un changement d'une rumeur que nous avons entendu en Avril, ce qui indique la prochaine Watch inclure une puce cellulaire. Selon toute vraisemblance, peu importe ce qui se passe, nous verrons la prochaine montre dévoilé cet automne - probablement à l'événement Septembre annuel d'Apple qui va également prendre le voile sur le prochain iPhone.
Source: Bloomberg
voir plus montre copie et montre repliques

2017年1月10日星期二

Audemars Piguet Royal Oak Offshore Diver

Audemars Piguet a lancé la montre d'un nouveau plongeur à SIHH la semaine dernière. Le Royal Oak Offshore Diver mesure 42mm x 13.75mm et est alimenté par la fabrication 3120 mouvement automatique AP. Le ROO Diver satisfait ou dépasse chacune des Swiss normes de l'industrie horlogère (NIHS) pour les montres de plongée, y compris dispositif de temps de présélection, la visibilité, la résistance à l'eau, les propriétés anti-magnétiques, la résistance aux chocs et aux variations thermiques, et la résistance aux forces externes.
La norme de dispositif de présélection de temps (NIHS 92-11 correspondant à la norme ISO 6425) appelle à un dispositif qui est protégé contre toute rotation involontaire. Le ROO Diver a une lunette intérieure unidirectionnelle qui est activé par l'intermédiaire d'un mécanisme de clic lié à la couronne à 10 heures. Le porteur doit dévisser la couronne de tourner la lunette.
Les normes de montres de plongée suisse exigent que le temps mesuré sur le cadran bague intérieure doit être lisible dans l'obscurité à une distance de 25 cm, soit environ 10 pouces. Le ROO Diver répond à cette exigence avec, luminescentes marqueurs à facettes bâton heure avec une heure facettes et luminescent et hands minute. La lunette intérieure a une échelle de minutes qui met en évidence des intervalles de 5 minutes.
Les normes suisses exigent toutes les montres de plongée doivent être étanches à l'eau à 100 mètres. Le Diver ROO dépasse cette norme avec 300 mètres étanchéité. Le ROO Diver répond également aux normes pour antimagmetic, le choc et la résistance à la variation thermique, et la taille de la boucle a été augmentée de sorte que la sangle peut résister à des forces jusqu'à 200 Newtons.
Le Diver ROO est équipé de la Manufacture Audemars Piguet à remontage automatique calibre 3120 mouvement. Le mouvement utilise un balancier à inertie variable avec un oscillante plat spiral à 21'600 alternances par heure. Le réglage est effectué au moyen de huit masselottes. Le pont de balancier traversant est fixé sur les deux côtés de la platine et fournit ainsi amélioré la résistance aux chocs. La seconde centrale à entraînement direct évite la main jeu.
Caliber 3120 dispose d'une réserve de marche de 60 heures, l'affichage rapide de la date d'ajustement, et d'arrêter ou de piratage secondes. Le mouvement est assemblé à la main dans Le Brassus. Les ponts sont anglés et polis. Les puits de bijoux sont diamantées. Les roues sont dotées de rayons chanfreinées et des puits de bijoux diamant poli. jantes à vis et les fentes sont chanfreinés. La décoration fabriqués à la main comprend une platine perlée sur les deux côtés et des ponts avec Côtes de Genève. Le monobloc en or 22 carats masse oscillante porte les armoiries des familles Audemars et Piguet et le monogramme AP.
Spécifications techniques apparaissent ci-dessous les images, qui peuvent être agrandies avec un clic.
AP Royal Oak Offshore Diver
AP Royal Oak Offshore Diver
AP Royal Oak Offshore Diver

CARACTERISTIQUES TECHNIQUES
Royal Oak Offshore Diver
Référence
15703ST.OO.A002CA.01 
Boîtier en acier inoxydable 
résistant à l' eau jusqu'à 300 mètres
Mouvement
exclusif Calibre 3120 à remontage automatique 
Diamètre total: 26,60 mm 
Diamètre du boîtier: 11,5 lignes (26 mm) 
Epaisseur: 4,25 mm 
40 rubis 
278 pièces en 
or 22 carats masse oscillante 
Jusqu'à réserve de marche de 60 heures 
Cadence du balancier: 21'600 alternances par heure 
Balancier à inertie variable à huit masselottes et ressort spiral plat de 
type Genève porte-piton mobile spiral à 
trois positions tige de remontoir 
Finition: toutes les pièces finement décorées; platine perlée; ponts rhodié, chanfreinés, colimaçonnage et Côtes de Genève. Diamond-brillant puits de bijoux; roues à rayons chanfreinées et des puits de bijoux diamant poli;jantes à vis chanfreinées et fentes 
Masse oscillante gravée du monogramme AP et les crêtes de famille Audemars et Piguet
Cas
en acier inoxydable 
noir couronnes en caoutchouc 
Diamètre: 42 mm 
Epaisseur: 13,75 mm 
Retour avec médaillon portant la légende Royal Oak Offshore 
Etanche à 300 mètres
Cadran
noir avec exclusif «Méga Tapisserie» motif 
bague tournante intérieure avec échelle de plongée 
index appliques gris avec revêtement luminescent 
FACETTES blanc heure d'or et des minutes avec un revêtement luminescent
Bracelet
caoutchouc noir avec boucle ardillon surdimensionnée en acier inoxydable
Fonctions
Heures et minutes 
Dive-temps de mesure 
Date de
voir plus imitation rolex et Chronoswiss

2017年1月2日星期一

Dive Watch Wednesday: The Visconti Abyssus 3000M

The most eye-catching new dive watch released this year also seems to be the least discussed. This might be because its maker was nowhere to be found in the main exhibition hall at Baselworld 2014 and also. probably, because the brand in question happens to be better known for writing instruments than watches.
However, Visconti’s new Scuba Abyssus 3000M offers a lot to write about: as a member of the more extreme species of sea creatures it will be available in three different case materials: Titanium (Ref. W108-02-132-00), stainless steel (W108-00-123-00) and — since Visconti is an Italian brand — of course, also in bronze (W108-01-131-00). The team at Diveintowatches.com had the chance to handle all three pre-production models in Basel, and here are some of the facts we were able to gather: Each version is limited to 399 pieces, and each is available on a rubber strap and a corresponding metal bracelet as well as on a leather strap (as shown). Whilst the 3,000-meter water resistance does not break any records, it still is an impressive number, even more because it is guaranteed by a seldom-used monobloc case. The case measures 45 mm in diameter and houses an integrated helium-release valve at 6 o’clock. As a novelty, the bezel’s ratcheting mechanism is reversed and exposed on the outside (intended for easier cleaning), and is secured with a locking system at 4 o’clock. Behind the 5-mm-thick sapphire crystal ticks a Caliber A-10 from Soprod, which features a power-reserve display, hours, minutes, central seconds, and date. The logo at 6 o’clock pays homage to a cooperation with the Italian industrial diving company CNS International – which helps greatly to justify the use of He-valve.
Visconti Scuba Abyssus 3000m - Front
The Abyssus’ most prominent feature is, of course, the large screw-down crown at 2 o’clock:  the bayonet-like mechanism is inspired by Visconti’s fountain pen caps and offers a patented system to unlock the movement, should it ever need to be removed. Compared to all those gorgeous, retro-styled new dive watches everyone fell (rightfully) in love with at Baselworld, the Visconti Abyssus is so completely over-engineered and extreme that it was nearly impossible not to play with it constantly (which could prove difficult when all the screws, bezel, and lugs are removed by a distracted owner). On a more serious note: Getting used to its overall look was a lot less difficult than expected, although the large “V” on the dial could have been smaller, or left out entirely. But that’s a matter of taste. From a more objective point of view, the four angles of the bezel make the watch resemble — a bit too closely, in my opinion — the Clerc Hydroscaph, and the use of a sharkskin strap raises some concerns: rubber straps and metal bracelets are a lot better equipped for underwater use than a part of an endangered species on a diver’s wrist. The buckle’s additional roll, however, was a nice touch.
Visconti Scuba Abyssus 3000m - Details
Prices are yet to be confirmed, the manufacturer can be reached atwww.visconti.it (with a lot more unconvential watches to be discovered)
voir plus montres replica et Hublot King Power